0
FitArc guide

How to tension and centre a treadmill belt

By FitArc

How to tension and centre a treadmill belt

A belt that drifts or slips can often be corrected at the rear roller. Small, even adjustments are the key.

Centring a drifting belt

  • Run the belt slowly with nobody on it.
  • If it drifts left, turn the left bolt a quarter turn clockwise.
  • If it drifts right, turn the right bolt a quarter turn clockwise.
  • Run it for 30 seconds and check again.

Tightening a slipping belt

Turn both bolts the same amount, a quarter turn at a time, then test at walking speed.

Do not over-tighten

A belt that is too tight strains the motor, rollers and bearings. If it still slips after a few small adjustments, the belt or deck is likely worn.

When to call us

If adjustments don't hold, the belt, rollers or deck need attention.

Safety first: always switch off and unplug a machine before you touch anything under the hood or near the rollers. If you are unsure, stop and ask us.

Rather have it done properly? Get your belt price, WhatsApp us or call 076 644 8160. We service all brands in Cape Town and nationwide.

Need a hand with your machine?

Get an estimate online or book a service.

← All guides

Chat on WhatsApp